Nothing on Display –

by | Sep 15, 2021 | Trouble Shooting

Cause: Treadmill not on or connection to display has come loose. Solution: First step check to ensure amber switch is turned on, second step check internal PCB to ensure black cord with white plug is connected, third step replace PCB and display.

E09 Error –

by | Sep 15, 2021 | Trouble Shooting

Cause: PCB issue. PCB needs replacement due to damage, short circuiting, hair/dirt buildup, or water damage. Solution: First step is to check all connections on internal motherboard, second step is to clean out all hair/dirt inside motor cover, third step is to...

E06 Error –

by | Sep 15, 2021 | Trouble Shooting

Cause: Display issue. Cause: Internal display connection has come loose, plug not fully connected at base of display stand, internal cord from PCB to display not secured, or PCB has been damaged. Solution: First step is to check all connections on internal motherboard...

E04 Error –

by | Sep 15, 2021 | Trouble Shooting

Cause: Issue with motor. Either loose connection to motor, excess hair/dirt buildup in motor cover, motor ground (green and yellow wire) has come loose, or replacement part required. Solution: First step is to check all connections on internal motherboard, second step...

E03 Error –

by | Sep 15, 2021 | Trouble Shooting

Cause: Loose connection on internal PCB or damage to PCB during transit. Solution: First step unplug and reconnect internal PCB wires and connector at the base of display stand, second step replace PCB.